Types of compasses
There are many kinds and shapes of compasses, however these are the most common you see marketed for survival purposes:Button compass. Sometimes they’re stand-alone, however they are often built into other gear, like a water-proof match container, to make it seem more "survivaly."
Clear baseplate compass. A transparent plastic base that might be rigid or foldable. The most frequent type for orienteering, and often referred to as an orienteering compass.
Lensatic military compass. Folds in half like a clamshell. Tougher construction. Designed to give very accurate bearings for army needs, eg. for calling in an artillery strike.
Parts of a Compass
Each edge of a compass may have different rulers for use with different map scales
2. Direction of Travel
This is a constant line or arrow marked on the base plate, located outside the spinning compass compartment. It points in the same direction the front of the compass is pointing.
3. Orienting Arrow
It is marked on the floor of the housing. It rotates with the housing when the dial is turned. You use it to orient a compass to a map.
4. Declination Scale
It is used to orient the compass in an area with known declination.
5. Dial with Degrees
This is a ring around the housing that has degree markings engraved. You hold the dial and rotate it to rotate the entire housing.
6. Index Line
This is a thin line that points in the same direction as the direction of travel line. It doesn’t spin, however it’s in or close the spinning compartment.
7. Magnetic Needle (arrow)
Magnetic North seeking arrow is magnetized piece of metal that has one end painted red to indicate North. This is the main arrow you’re all familiar with. It sits on a fine point that is nearly frictionless so it rotates freely when the compass is held fairly level and steady. The tip is usually red, which teachers often use in the memorable "red in the shed".
8. Orienting Lines
Built into the face of the compass so that it points to 360 degrees on the rotating bezel ring. The orienting arrow and lines will point wherever you rotate the bezel. The space inside the arrow is the "shed".
9. Rotating Housing
The rotating ring around the Magnetic North seeking arrow with the degree numbers from 0 to 360.
10. Base Plate
Base Plate is hard, flat surface on which the rest of the compass is mounted. It has a rulers on its edges for measuring distances on maps.
2. A direction of travel arrow reminds which direction to point the compass when taking a bearing.
3. The big arrow called the orienting arrow which we’ll use to help orient the bezel.
4. Some compasses have a handy declination scale which makes it easier to adjust declination.
5. The big circle dial with degrees is the rotating bezel which is marked with degrees from N clockwise up to 360.
6. There is a little marker called the index line which marks where bearings can be read.
7. Inside the bezel, the first thing can be noticed is the magnetized needle which always points to the magnetic north pole, not the true North Pole.
8. Alongside the orienting arrow our orienting lines that can be used to help line up the compass with north on a map.
9. A liquid capsule that contains the magnetic needle is rotating housing. The liquid helps dampen the needle movement, making it easier to get a more accurate reading.
10. The base plate is clear so the map below it can be seen, and there’s always at least one straight edge that can be used later for taking bearings.
